xD L4-1.8L (2ZR-FE) (2008)
Throttle Body: Service and Repair
Installation
2ZR-FE ENGINE CONTROL SYSTEM: THROTTLE BODY: INSTALLATION
INSTALLATION
1. INSTALL THROTTLE BODY ASSEMBLY
(a) Install a new gasket onto the intake manifold.
(b) Install the throttle body assembly with the 2 bolts and 2 nuts.
Torque: 10 Nm (102 kgf-cm, 7 ft-lbf)
(c) Connect the water by-pass hose and the No. 2 water by-pass hose.
(d) Connect the throttle body assembly connector.
2. INSTALL AIR CLEANER CAP SUB-ASSEMBLY WITH HOSE
(a) Install air cleaner cap sub-assembly with hose and lock the 2 clamps.