xD L4-1.8L (2ZR-FE) (2008)
^ The ECM (PCM) should NOT be replaced as part of the repair procedure.
^ Authorized Modification Labels may be ordered in packages of 25 from the Materials Distribution Center (MDC) through Dealer Daily - Dealer
Support Materials Orders.
Calibration Information
Required Tools & Equipment
Inspection Procedure
1. Inspect and note the engine oil level.
2. If oil level is low inspect for leak source and repair. If NO leaks are present proceed to step 3.
3. Add engine oil as necessary and then proceed to the ECM reprogramming procedure.
Repair Procedure