xD L4-1.8L (2ZR-FE) (2008)
Steering Control Module: Service and Repair
Installation
POWER STEERING: POWER STEERING ECU: INSTALLATION
INSTALLATION
1. INSTALL POWER STEERING ECU ASSEMBLY
(a) Install the power steering ECU with the 2 nuts.
Torque: 5.0 Nm (51 kgf-cm, 44 in-lbf)
(b) Connect the 4 connectors.
(c) Install the wire harness clamp.
(d) Install the 2 wire harness clamps onto the power steering ECU assembly.
2. INSTALL UPPER INSTRUMENT PANEL See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Upper Instrument Panel/Installation
3. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Upper Instrument Panel/Installation
4. INSTALL INSTRUMENT CLUSTER FINISH PANEL RETAINER See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Upper Instrument Panel/Installation