xD L4-1.8L (2ZR-FE) (2008)
Panel/Service and Repair/Upper Instrument Panel/Removal
46. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY See: Instrument Panel, Gauges and Warning Indicators/Instrument
Cluster / Carrier/Service and Repair/Combination Meter/Removal
47. REMOVE COMBINATION METER ASSEMBLY See: Instrument Panel, Gauges and Warning Indicators/Instrument Cluster / Carrier/Service
and Repair/Combination Meter/Removal
48. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Upper Instrument Panel/Removal
49. REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Upper Instrument Panel/Removal
50. REMOVE REAR CENTER SEAT OUTER BELT ASSEMBLY See: Seat Belt Systems/Seat Belt/Service and Repair/Rear Center Seat Outer Belt
Assembly/Removal
51. REMOVE SEAT BELT ANCHOR COVER See: Seat Belt Systems/Seat Belt/Service and Repair/Rear Center Seat Outer Belt Assembly/Removal
52. REMOVE ROOF HEADLINING See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
53. REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY RH
(a) Remove the 4 clips.
(1) Using a clip remover, remove the pin.
(2) Using needle-nose pliers, remove the clip and curtain shield airbag from the body as shown in the illustration.