xD L4-1.8L (2ZR-FE) (2008)
/Page-1801020.png)
Torque: 9.8 Nm (100 kgf-cm, 86 in-lbf)for Bolt A
Torque: 14 Nm (143 kgf-cm, 10 ft-lbf)for Bolt B
NOTE: Do not twist the curtain shield airbag assembly when installing it.
(e) Install the 4 clips and the curtain shield airbag assembly to the body panel as shown in the illustration.
NOTE: Make sure that the pins of the clips are pushed in firmly.
(f) Mark the clips.
HINT: Mark the clips to make sure that they are not reused.
(g) Connect the airbag connector.
NOTE: Securely lock the locking button.
4. INSTALL ROOF HEADLINING See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
5. INSTALL SEAT BELT ANCHOR COVER See: Seat Belt Systems/Seat Belt/Service and Repair/Rear Center Seat Outer Belt
Assembly/Installation
6. INSTALL SHOULDER BELT ANCHOR COVER RH See: Seat Belt Systems/Seat Belt/Service and Repair/Rear Center Seat Outer Belt
Assembly/Installation
7. INSTALL REAR CENTER SEAT OUTER BELT ASSEMBLY See: Seat Belt Systems/Seat Belt/Service and Repair/Rear Center Seat Outer Belt
Assembly/Installation
