xD L4-1.8L (2ZR-FE) (2008)
NOTE: Do not use a steering pad that has been dropped.
(a) Confirm that the ignition switch is turned to OFF.
(b) Confirm that the negative battery terminal is detached.
CAUTION: Do not begin the operation for at least 90 seconds after the negative battery terminal has been detached.
(c) Connect the horn terminal.
(d) Connect the airbag connector.
NOTICE:
-
Match the color of the airbag connector with that of the steering pad assembly, and install the airbag connector.
-
Securely lock the locking button.
(e) Install the steering pad.
(f) Using "TORX" socket wrench T30, tighten the 2 bolts.
Torque: 8.8 Nm (90 kgf-cm, 78 in-lbf)
NOTE: Tighten the 2 bolts while holding the steering pad to prevent it moving upward.
2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)
3. INSPECT SRS WARNING LIGHT
See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnosis System