xD L4-1.8L (2ZR-FE) (2008)
Air Bag: Testing and Inspection
Curtain Shield Airbag Assembly
SUPPLEMENTAL RESTRAINT SYSTEM: CURTAIN SHIELD AIRBAG ASSEMBLY: ON-VEHICLE INSPECTION
ON-VEHICLE INSPECTION
1. INSPECT CURTAIN SHIELD AIRBAG ASSEMBLY (for Vehicle not Involved in Collision)
(a) Perform a diagnostic system check See: Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes/DTC Check / Clear.
(b) With the curtain shield airbag installed on the vehicle, perform a visual check. If there are any defects, such as those mentioned below, replace
the front pillar garnish or roof headlining with a new one:
-
Any cuts, minute cracks or marked discoloration on the front pillar garnish and roof headlining around the curtain shield airbag.
2. INSPECT CURTAIN SHIELD AIRBAG ASSEMBLY (for Vehicle Involved in Collision and Airbag not Deployed)
CAUTION: For curtain shield airbag removal and installation procedures, See: Service and Repair/Curtain Shield Airbag
Assembly/Removal and See: Service and Repair/Curtain Shield Airbag Assembly/Installation, and carefully follow the correct procedure.
(a) Perform a diagnostic system check See: Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes/DTC Check / Clear.
(b) With the curtain shield airbag removed from the vehicle, if there are any defects, such as those mentioned below, replace the curtain shield
airbag with a new one:
-
Any cuts, minute cracks or marked discoloration on the curtain shield airbag.
-
Any cracks or other damage to the connector.