xD L4-1.8L (2ZR-FE) (2008)
Clockspring Assembly / Spiral Cable: Service and Repair
Removal
SUPPLEMENTAL RESTRAINT SYSTEM: SPIRAL CABLE: REMOVAL
REMOVAL
CAUTION: Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag
system before servicing See: Service Precautions.
1. TURN FRONT WHEELS FACING STRAIGHT AHEAD
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait for 90 seconds after disconnecting the cable to prevent airbag deployment.
3. REMOVE STEERING PAD See: Air Bag/Service and Repair/Steering Pad/Removal
4. REMOVE STEERING WHEEL ASSEMBLY See: Steering and Suspension/Steering/Steering Column/Service and Repair/Removal
5. REMOVE STEERING COLUMN LOWER COVER See: Steering and Suspension/Steering/Steering Column/Service and Repair/Removal
6. REMOVE STEERING COLUMN UPPER COVER See: Steering and Suspension/Steering/Steering Column/Service and Repair/Removal
7. REMOVE SPIRAL CABLE
(a) Detach the horn connector.
(b) Slide the slider and detach the airbag connector.
(c) Detach the steering sensor connector.
(d) Disengage the 3 claws and remove the spiral cable.
8. REMOVE STEERING ANGLE SENSOR See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Steering Angle
Sensor/Service and Repair/Removal