xD L4-1.8L (2ZR-FE) (2008)
Removal
SUPPLEMENTAL RESTRAINT SYSTEM: REAR AIRBAG SENSOR: REMOVAL
REMOVAL
CAUTION: Some of the these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS
airbag system before servicing See: Service Precautions.
NOTE: Always use "TORX" socket wrench E10 when installing the rear seat.
HINT: The procedure described below is for the RH side. Use the same procedure for both the RH and LH sides, unless otherwise specified.
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE DECK BOARD ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal