xD L4-1.8L (2ZR-FE) (2008)
(e) Install the through anchor with the bolt.
Torque: 42 Nm (428 kgf-cm, 31 ft-lbf)
(f) Engage the 2 claws and close the slip joint cover.
4. INSTALL ROOF SIDE INNER GARNISH RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
5. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation
6. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation
7. INSTALL REAR SEAT OUTER BELT ASSEMBLY RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation
8. INSTALL REAR DECK TRIM COVER See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
9. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH See: Rear Seat Outer Belt Assembly/Installation
10. INSTALL REAR DOOR SCUFF PLATE RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
11. INSTALL REAR SEAT ASSEMBLY RH See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for RH Side)/Installation
12. INSTALL NO. 1 REAR SEAT LEG COVER See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for RH Side)/Installation
13. INSTALL DECK BOARD SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
14. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)
Components
SEAT BELT: REAR SEAT INNER BELT ASSEMBLY (for LH Side): COMPONENTS
COMPONENTS
ILLUSTRATION