xD L4-1.8L (2ZR-FE) (2008)
Removal
SEAT BELT: REAR SEAT OUTER BELT ASSEMBLY: REMOVAL
REMOVAL
CAUTION: Always use "TORX" socket wrench E10 when removing the rear seat.
HINT: The procedure described below is for the RH side. Use the same procedure for both the RH and LH sides, unless otherwise specified.
1. REMOVE DECK BOARD ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
2. REMOVE NO. 1 REAR SEAT LEG COVER (for RH Side) See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for RH
Side)/Removal