xD L4-1.8L (2ZR-FE) (2008)
(d) Remove the screw.
(e) Disengage the 3 clips and the 7 claws and remove the deck trim side panel.
HINT: When removing the deck trim side panel assembly LH, disconnect the room light connector and remove the deck trim side panel.
12. REMOVE REAR SEAT SHOULDER BELT HANGER
(a) Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the rear seat shoulder belt hanger.
13. REMOVE ROOF SIDE INNER GARNISH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
14. REMOVE REAR SEAT OUTER BELT ASSEMBLY
(a) Remove the bolt and the through anchor.
(b) Remove the bolt, the 2 hooks and the retractor.
15. REMOVE SEAT BELT HOLE SEAL