xD L4-1.8L (2ZR-FE) (2008)
DOOR LOCK: DOOR CONTROL SWITCH: REMOVAL
REMOVAL
1. REMOVE FRONT DOOR ARMREST BASE UPPER PANEL See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and
Repair/Disassembly
2. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (for Driver Side)
(a) Remove the 3 screws and the power window regulator master switch assembly.
3. REMOVE DOOR CONTROL SWITCH (for Front Passenger Side)
(a) Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the door control switch.
Installation
DOOR LOCK: DOOR CONTROL SWITCH: INSTALLATION
INSTALLATION
1. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (for Driver Side)
(a) Install the power window regulator master switch assembly with the 3 screws.
2. INSTALL DOOR CONTROL SWITCH (for Front Passenger Side)
(a) Engage the 2 claws and install the door control switch.