xD L4-1.8L (2ZR-FE) (2008)
(a) Install the yaw rate and acceleration sensor protector with the 2 nuts.
Torque: 9.0 Nm (92 kgf-cm, 80 in-lbf)
3. INSTALL REAR CONSOLE BOX COVER See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Installation
4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)
5. PERFORM YAW RATE AND ACCELERATION SENSOR ZERO POINT CALIBRATION See: Brakes and Traction Control/Antilock Brakes
/ Traction Control Systems/Testing and Inspection/Component Tests and General Diagnostics/Vehicle Stability Control System/Calibration
6. CHECK VSC SENSOR SIGNAL See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Testing and Inspection/Initial
Inspection and Diagnostic Overview/Vehicle Stability Control System/Test Mode Procedure