xD L4-1.8L (2ZR-FE) (2008)
(d) Connect the throttle body assembly connector.
(e) Connect the ventilation hose.
(f) Connect the 4 wire harness clamps.
3. INSTALL TRANSMISSION OIL LEVEL GAUGE SUB-ASSEMBLY (for Automatic Transaxle) See: Engine, Cooling and
Exhaust/Engine/Intake Manifold/Service and Repair/Installation
4. INSTALL OIL COOLER TUBE (for Automatic Transaxle) See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and
Repair/Installation
5. INSTALL ENGINE OIL LEVEL DIPSTICK
6. INSTALL STARTER ASSEMBLY
7. INSTALL INJECTOR VIBRATION INSULATOR See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Injector/Service and
Repair/Installation
8. INSTALL NO. 1 DELIVERY PIPE SPACER See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Injector/Service and
Repair/Installation
9. INSTALL FUEL DELIVERY PIPE SUB-ASSEMBLY See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Injector/Service and
Repair/Installation
10. CONNECT FUEL TUBE SUB-ASSEMBLY See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Injector/Service and
Repair/Installation
11. INSTALL FUEL PIPE CLAMP See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Injector/Service and Repair/Installation
12. CONNECT VACUUM HOSE See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Injector/Service and Repair/Installation