scion Workshop Repair Guides

Scion Workshop Service and Repair Manuals

Sensors and Switches - Wiper and Washer Systems > < Power Window Master Switch|Page 1168
Page 2
background image

WINDSHIELD / WINDOWGLASS: REAR POWER WINDOW SWITCH: REMOVAL

REMOVAL

HINT:
-

Use the same procedure for both the RH and LH side.

-

The procedure described below is for the RH side.

1. REMOVE REAR DOOR ARMREST BASE UPPER PANEL See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Service and

Repair/Disassembly

                 

2. REMOVE REAR POWER WINDOW SWITCH

(a) Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the rear power window switch.

Installation

WINDSHIELD / WINDOWGLASS: REAR POWER WINDOW SWITCH: INSTALLATION

INSTALLATION

1. INSTALL REAR POWER WINDOW SWITCH

(a) Engage the 2 claws and install the rear power window switch.

2. INSTALL REAR DOOR ARMREST BASE UPPER PANEL See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Service and

Repair/Reassembly

Sensors and Switches - Wiper and Washer Systems > < Power Window Master Switch|Page 1168