xD L4-1.8L (2ZR-FE) (2008)
Alternator: Service and Repair
Removal
2ZR-FE CHARGING: GENERATOR: REMOVAL
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE ENGINE UNDER COVER RH
3. REMOVE NO. 2 CYLINDER HEAD COVER
4. REMOVE FAN AND GENERATOR V BELT
5. REMOVE ENGINE MOUNTING INSULATOR SUB-ASSEMBLY RH
(a) Remove 2 bolts and remove the engine mounting stay RH.
(b) Place a wooden block on a jack underneath the engine.
(c) Remove the 6 bolts and nut and remove the engine mounting insulator sub-assembly RH.
NOTE: Do not remove bolt A.
6. REMOVE TRANSVERSE ENGINE ENGINE MOUNTING BRACKET
(a) Remove the 3 bolts and remove the engine mounting bracket.
7. REMOVE GENERATOR ASSEMBLY