xD L4-1.8L (2ZR-FE) (2008)
INSPECTION PROCEDURE
PROCEDURE
1. READ VALUE USING TECHSTREAM (STARTER SIGNAL)
(a) Connect a Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the tester ON.
(d) Select the following menu items: Powertrain / Engine and ECT / Engine and ECT / Data List / All Data / Starter Signal.
(e) Check the result when the ignition switch is turned to ON and START positions.
OK:
Result:
B -- INSPECT ECM (STSW TERMINAL VOLTAGE)
A -- PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE
2. INSPECT ECM (STSW TERMINAL VOLTAGE)