scion Workshop Repair Guides

Scion Workshop Service and Repair Manuals

Steering/Suspension - Vehicle Pull Repair Supplement|Page 5685 > < Steering/Suspension - Vehicle Pull Repair Supplement|Page 5683
Page 5
background image

problems such as uneven tire wear; etc.

1. Troubleshooting

First determine whether vehicle pulling to one side is caused by a wheel alignment problem or tire characteristics, then decide which repairs to make.

A.Perform the following checks and correct as necessary.

(1) Check tires for size, wear and for proper inflation pressure.

(2) Check whether the vehicle is noticeably tilted backward/forward or left/right.

NOTE

Tilting of the vehicle produces a left-right difference in the camber and caster and can cause vehicle pulling to one side.

(3) Check brakes for dragging.

B. Confirm problem symptoms.

With the customer accompanying you, drive the vehicle to confirm if the customer's complaint involves vehicle pulling to one side or steering
wheel oft center.

If the problem is steering wheel off center, refer to the Repair Manual for the adjustment procedure. For 2002 model year vehicles only, refer to
TSB No. , "Steering Wheel Off Center Adjustment Procedure". Also check the direction of vehicle pulling and the extent of the pulling.

C. Decide if vehicle pulling is due to wheel alignment or tires.

(1) Switch the left and right front tires (If the tires are non-unidirectional).

(2) Conduct a drive test to check whether the direction that the vehicle pulls has changed.

Helpful hints to determine cause of vehicle pulling:

^ The direction of lateral force from tire conicity becomes reversed when the left and right tires are switched. Therefore if the pulling direction

changes when the tires are switched it can be concluded that vehicle pulling is caused by tire conicity.

^ The vehicle is pulled to the right by the lateral force exerted to the right.

Steering/Suspension - Vehicle Pull Repair Supplement|Page 5685 > < Steering/Suspension - Vehicle Pull Repair Supplement|Page 5683