xD L4-1.8L (2ZR-FE) (2008)
24. FULLY TIGHTEN REAR SHOCK ABSORBER RH
HINT: The installation procedure for the RH side is the same as that for the LH side.
25. FILL RESERVOIR WITH BRAKE FLUID See: Brakes and Traction Control/Brake Bleeding/Service and Repair/Replacement
26. BLEED MASTER CYLINDER See: Brakes and Traction Control/Brake Bleeding/Service and Repair/Replacement
27. BLEED BRAKE LINE See: Brakes and Traction Control/Brake Bleeding/Service and Repair/Replacement
28. BLEED BRAKE ACTUATOR (w/ VSC) See: Brakes and Traction Control/Brake Bleeding/Service and Repair/Replacement
29. CHECK FLUID LEVEL IN RESERVOIR See: Brakes and Traction Control/Brake Bleeding/Service and Repair/Replacement
30. CHECK FOR BRAKE FLUID LEAKAGE
31. INSPECT REAR WHEEL ALIGNMENT
See: Alignment/Service and Repair/Rear Wheel Alignment
32. CHECK ABS SENSOR SIGNAL (w/o VSC)
See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview/ABS
(Antilock Brake System)/Test Mode Procedure
33. CHECK VSC SENSOR SIGNAL (w/ VSC)
See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Testing and Inspection/Initial Inspection and Diagnostic
Overview/Vehicle Stability Control System/Test Mode Procedure