xD L4-1.8L (2ZR-FE) (2008)
Control Arm: Service and Repair
Removal
SUSPENSION: FRONT LOWER SUSPENSION ARM: REMOVAL
REMOVAL
1. REMOVE FRONT WHEEL
2. REMOVE FRONT LOWER SUSPENSION ARM SUB-ASSEMBLY LH (for Manual Transaxle)
(a) Remove the clip and castle nut.
(b) Install SST (spacer B) to the threaded section of the lower ball joint.
SST: 09960-20010
09961-02060
NOTE: Make sure the upper ends of the threaded section of the lower ball joint and SST (spacer B) are aligned.
(c) Using SST, separate the lower arm.
SST: 09960-20010
09961-02010
NOTICE:
-
Make sure to tie the string of SST to the vehicle to prevent SST from dropping.
-
Install SST so that A and B are parallel.
-
Be sure to place the wrench on the part indicated in the illustration.
-
Do not damage the lower ball joint dust cover.
-
Do not damage the drive shaft outboard joint boots.
-
Do not damage the front disc brake dust cover.