xD L4-1.8L (2ZR-FE) (2008)
Stabilizer Bar: Service and Repair
Removal
SUSPENSION: FRONT STABILIZER BAR: REMOVAL
REMOVAL
1. REMOVE HOOD SUB-ASSEMBLY
2. REMOVE FRONT WIPER ARM HEAD CAP See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper Motor/Removal
3. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper
Motor/Removal
4. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper
Motor/Removal
5. REMOVE HOOD TO COWL TOP SEAL See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper Motor/Removal
6. REMOVE COWL TOP VENTILATOR LOUVER RH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper
Motor/Removal
7. REMOVE COWL TOP VENTILATOR LOUVER LH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper
Motor/Removal
8. REMOVE FRONT WIPER MOTOR AND LINK See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper Motor/Removal
9. REMOVE FRONT AIR SHUTTER SEAL RH
10. REMOVE OUTER COWL TOP PANEL
11. POSITION WHEELS FACING STRAIGHT AHEAD
12. REMOVE FRONT WHEEL
13. REMOVE COLUMN HOLE COVER SILENCER SHEET See: Steering/Steering Gear/Service and Repair/Removal
14. REMOVE STEERING SLIDING YOKE SUB-ASSEMBLY See: Steering/Steering Gear/Service and Repair/Removal
15. REMOVE NO. 1 STEERING COLUMN HOLE COVER SUB-ASSEMBLY See: Steering/Steering Gear/Service and Repair/Removal
16. SEPARATE TIE ROD END SUB-ASSEMBLY LH
17. SEPARATE TIE ROD END SUB-ASSEMBLY RH
HINT: The removal procedure for the RH side is the same as that for the LH side.
18. SEPARATE FRONT LOWER SUSPENSION ARM SUB-ASSEMBLY LH
19. SEPARATE FRONT LOWER SUSPENSION ARM SUB-ASSEMBLY RH
HINT: The removal procedure for the RH side is the same as that for the LH side.