xD L4-1.8L (2ZR-FE) (2008)
7. INSTALL FRONT STABILIZER LINK ASSEMBLY LH
(a) Install the stabilizer link with the 2 nuts.
Torque: 74 Nm (755 kgf-cm, 55 ft-lbf)
HINT: If the ball joint turns together with the nut, use a socket hexagon wrench 6 to hold the stud.
8. INSTALL FRONT STABILIZER LINK ASSEMBLY RH
HINT: The installation procedure for the RH side is the same as that for the LH side.
9. INSTALL FRONT LOWER SUSPENSION ARM SUB-ASSEMBLY LH
10. INSTALL FRONT LOWER SUSPENSION ARM SUB-ASSEMBLY RH
HINT: The installation procedure for the RH side is the same as that for the LH side.
11. INSTALL TIE ROD END SUB-ASSEMBLY LH
12. INSTALL TIE ROD END SUB-ASSEMBLY RH
HINT: The installation procedure for the RH side is the same as that for the LH side.
13. INSTALL STEERING COLUMN NO. 1 HOLE COVER SUB-ASSEMBLY See: Steering/Steering Gear/Service and Repair/Installation
14. INSTALL STEERING SLIDING YOKE SUB-ASSEMBLY See: Steering/Steering Gear/Service and Repair/Installation
15. INSTALL COLUMN HOLE COVER SILENCER SHEET See: Steering/Steering Gear/Service and Repair/Installation
16. INSTALL FRONT WHEEL
Torque: 103 Nm (1050 kgf-cm, 76 ft-lbf)
17. POSITION WHEELS FACING STRAIGHT AHEAD
18. INSTALL OUTER COWL TOP PANEL
19. INSTALL FRONT AIR SHUTTER SEAL RH
20. INSTALL FRONT WIPER MOTOR AND LINK See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper
Motor/Installation
21. INSTALL COWL TOP VENTILATOR LOUVER LH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper
Motor/Installation
22. INSTALL COWL TOP VENTILATOR LOUVER RH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper
Motor/Installation
23. INSTALL HOOD TO COWL TOP SEAL See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper Motor/Installation
24. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY LH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper
Motor/Installation
25. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY RH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper
Motor/Installation