xD L4-1.8L (2ZR-FE) (2008)
10. INSTALL COWL TOP VENTILATOR LOUVER LH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper
Motor/Installation
11. INSTALL COWL TOP VENTILATOR LOUVER RH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper
Motor/Installation
12. INSTALL HOOD TO COWL TOP SEAL See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper Motor/Installation
13. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY LH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper
Motor/Installation
14. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY RH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper
Motor/Installation
15. INSTALL FRONT WIPER ARM HEAD CAP See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper Motor/Installation
16. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT
See: Alignment/Service and Repair/Front Wheel Alignment
Disassembly
SUSPENSION: FRONT SHOCK ABSORBER WITH COIL SPRING: DISASSEMBLY
DISASSEMBLY
1. REMOVE FRONT SUSPENSION SUPPORT SUB-ASSEMBLY
2. REMOVE FRONT SUPPORT TO FRONT SHOCK ABSORBER NUT
(a) Using a socket hexagon wrench 6, fix the shock absorber rod and loosen the nut.
(b) Using SST, compress the coil spring.
SST: 09727-30021
09727-00010
09727-00021
09727-00031
NOTE: Do not use an impact wrench. It will damage SST.
(c) Remove the nut.
3. REMOVE FRONT COIL SPRING UPPER SEAT