xD L4-1.8L (2ZR-FE) (2008)
Transmission Speed Sensor: Service and Repair
Installation
U341E AUTOMATIC TRANSAXLE: SPEED SENSOR: INSTALLATION
INSTALLATION
1. INSTALL SPEED SENSOR NT
(a) Coat a new O-ring with ATF, and install it onto the speed sensor NT.
(b) Install the speed sensor NT with the bolt.
Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)
(c) Connect the speed sensor NT connector.
2. INSTALL BATTERY CARRIER See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Installation
3. INSTALL BATTERY TRAY
4. INSTALL BATTERY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine Assembly/Installation
5. INSPECT FOR AUTOMATIC TRANSAXLE FLUID LEAK