xD L4-1.8L (2ZR-FE) (2008)
Wiring Harness: Service and Repair
Installation
U341E AUTOMATIC TRANSAXLE: TRANSMISSION WIRE: INSTALLATION
INSTALLATION
1. INSTALL TRANSMISSION WIRE
(a) Coat a new O-ring with ATF and install it onto the transmission wire.
(b) Pass the transmission wire through the transaxle.
(c) Install the transmission wire with the bolt.
Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)
2. INSTALL TRANSMISSION VALVE BODY ASSEMBLY See: Valve Body/Service and Repair/Valve Body Assembly/Installation
3. INSTALL VALVE BODY OIL STRAINER ASSEMBLY See: Valve Body/Service and Repair/Valve Body Assembly/Installation
4. INSTALL AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY See: Valve Body/Service and Repair/Valve Body Assembly/Installation
5. ADD AUTOMATIC TRANSAXLE FLUID
6. INSPECT AUTOMATIC TRANSAXLE FLUID LEVEL See: Service and Repair/Procedures
7. INSPECT FOR AUTOMATIC TRANSAXLE FLUID LEAK
8. INSTALL ENGINE UNDER COVER LH
Torque: 5.0 Nm (51 kgf-cm, 44 in-lbf)