xD L4-1.8L (2ZR-FE) (2008)
/Page-1190001.png)
Clutch Slave Cylinder: Service and Repair
Disassembly
CLUTCH: CLUTCH RELEASE CYLINDER: DISASSEMBLY
DISASSEMBLY
1. REMOVE CLUTCH RELEASE CYLINDER KIT
(a) Remove the boot from the cylinder body.
(b) Remove the push rod from the cylinder body.
(c) Remove the piston from the cylinder body.
NOTE: Do not damage the inside of the cylinder body.
(d) Remove the spring from the cylinder body.
(e) Remove the bleeder plug cap from the bleeder plug.
2. REMOVE RELEASE CYLINDER BLEEDER PLUG
