xD L4-1.8L (2ZR-FE) (2008)
17. REMOVE FRONT PILLAR GARNISH LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
18. REMOVE ASSIST GRIP See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
19. REMOVE VISOR ASSEMBLY RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
20. REMOVE VISOR ASSEMBLY LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
21. REMOVE VISOR HOLDER See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
22. REMOVE PERSONAL LIGHT ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Console/Console Lamp/Service and
Repair/Removal
23. REMOVE ROOM LIGHT ASSEMBLY See: Lighting and Horns/Dome Lamp/Service and Repair/Room Light Assembly (for Center)/Removal
24. REMOVE ROOF HEADLINING ASSEMBLY
HINT: It is not necessary to remove the roof headlining completely. Slightly lower the front section of the roof headlining.
25. REMOVE INNER REAR VIEW MIRROR ASSEMBLY See: Body and Frame/Mirrors/Service and Repair/Inner Rear View Mirror/Removal
26. REMOVE WINDSHIELD OUTSIDE MOULDING
(a) Using a knife, cut off the windshield outside moulding, as shown in the illustration.
NOTE: Do not damage the vehicle body with the knife.
(b) Remove the windshield outside moulding.
HINT: Make a partial cut in the windshield outside moulding. Then pull and remove it by hand.
27. REMOVE WINDSHIELD GLASS
(a) Disconnect the stoppers.