xD L4-1.8L (2ZR-FE) (2008)
6. INSTALL WINDOW GLASS ADHESIVE DAM
(a) Using a brush or sponge, coat the application area of adhesive dam with Primer G.
NOTICE:
-
Do not apply too much primer.
-
Allow the primer coating to dry for 3 minutes or more.
-
Throw away any leftover primer.
HINT: If an area other than that specified is coated by accident, wipe off the primer with a clean piece of cloth before it dries.
(b) Install a new adhesive dam onto the windshield glass, as shown in the illustration.
Standard dimension:
NOTE: Install the new adhesive dam along the ceramic notches.
7. INSTALL WINDSHIELD GLASS