xD L4-1.8L (2ZR-FE) (2008)
(d) Align the blade tip with the mark on the glass, as shown in the illustration.
(e) Tighten the nut on the front wiper arm.
Torque: 26 Nm (265 kgf-cm, 19 ft-lbf)
7. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY RH
(a) Clean any metal powder off the serrated part of the wiper arm with a round wire brush or the equivalent (when reinstalling).
(b) Clean the wiper pivot serrations with a wire brush.
(c) Operate the wiper, then stop the wiper motor in the automatic stop position.