seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Changing the ATF > < ATF level: checking

Leon Mk1

Replace ATF
Replace ATF
–  Remove the cap which secures the plug, levering with a screwdriver -arrow-. On doing this the protection of the cap is broken and it must always be replaced.
   
–  Remove the filling hose cap.
  N37-0352
–  Refill ATF with -V.A.G 1924- until ATF comes out through the control opening -arrow-.
  Caution
Either insufficient or excessive fluid can alter the functioning of the gearbox
  N37-0353
–  Tighten the level plug with a new seal -arrow 1- to 15 Nm.
–  Fit the cap in the filling tube until the safety tab is seated.
–  Fit a new cap to the locking cap arrow -2-.
–  Seat the cap.
  Caution
Always replace the cap because it secures the sealing lid
  N37-0354

Changing the ATF > < ATF level: checking