seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Gear drive mechanism: repairing > < Connect fault reader V.A.G?5051 and select the functions

Leon Mk1

Installation
Installation
–  Secure the control unit.
   
–  Fit the multiple connector to pins -1- and -2- in the control unit and then block the multiple connector -arrow-.
  Note!
When fitting it, make sure that the guides -1- fit into the pins in the control unit
–  Carry out basic adjustment: → VAS 5051; Vehicle self-diagnosis
  S01-0079
Diagnosis connection in vehicles up to 06.00
Location: the diagnosis connection is located behind the tray on the driver side, on top of the fuseholder.
  N37-0550
Diagnosis connection in vehicles from 07.00 onwards
Location: the diagnosis connection -arrow- is located in the central console.
–  To access the connector, remove the casing from inside the ashtray in the central console, by levering it.
  E01-0184
Kick-down switch -F8-
Location: the kick-down switch -arrow- is incorporated in the accelerator cable and is located in front of the bulkhead wall, in the engine compartment.
  N01-0202

Gear drive mechanism: repairing > < Connect fault reader V.A.G?5051 and select the functions