seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Clutch pump: removing and installing|Installation > < Clutch pump: removing and installing

Leon Mk1

Removing
Removing
–  With the ignition switched off disconnect battery earth strap.
  Note!
For vehicles fitted with a coded radio, first check the anti-theft code.
   
–  Remove the intake hose -1-, the connector -2- from the air mass meter and the breather hose -3-.
–  Remove the air filter casing, removing screws -4- and -5-.
  A37-0192
–  Pull off coolant fluid level sensor if there is one -arrow 1-.
–  Separate the side cover of the coolant liquid deposit pulling upwards.
–  Remove the coolant liquid deposit -arrow 2- and place it on one side without forcing any of the hoses.
  Note!
t  Do not open the cooling system.
t  When handling the brake fluid hoses, ensure that no liquid falls on the bodywork or on any other element.
  E30-0047
–  Pull off the return hose -A- that goes from the brake fluid deposit and cover it.
–  Remove clip -B- for the clutch pump pipework/hose, levering with a screwdriver.
–  Remove all the pipework/hose -C- from the clutch pump and cover it.
–  Remove the clutch pump securing bolts.
–  Remove shelf and footwell cover, driver's side: → General body repairs-assembly work, interior; Rep. Gr.68.
–  Remove the main junction box from its fixing point and leave it hanging, moved aside.
–  Move aside any electric cables that are in the way.
  Note!
Do not separate the cables from their connectors nor remove the relays.
  E30-0031
–  Remove lower part of the protective cover from the pedal assembly bracket. To do so disattach it from the upper part -arrow 2-, and move it downwards -arrow 1-.
  E30-0065
Unblock the clutch pump actioning rod from the clutch pedal as follows:
–  Fit tool -T20059A- on the housing lugs -arrow-. Use the points -T20059A/1- of Ø 5.6 with the milling diagonally, so that the longest point is on the right side of the pedal.
–  Press the housing lugs with tool -T20059A- and remove the rod from its housing outside the clutch pedal, pulling in the direction of movement.
–  Remove clutch pump from the engine bay.
  E30-0049

Clutch pump: removing and installing|Installation > < Clutch pump: removing and installing