Fit the neutral overpass spring into tool -T20117-. To do this, compress the spring in a vice with protected jaws.
–
Press the clutch to the floor.
–
First fit the neutral overpass spring in the housing at the front of the support block -arrow A- and align the rear seat of the spring with the clutch pedal pivot -arrow B-.
–
Release the clutch pedal gradually until tool -T20117- can be removed.
Fit the protective cover (upper and lower parts) to the pedal assembly bracket, in the reverse order to disassembly → Anchor.
–
Secure electric cables to their original positions.