seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Differential crown: removing and installing|Installation > < Differential crown: removing and installing

Leon Mk1

Removing
Removing
  Note!
t  Protect the roller bearings and sprocket for speedometer actioning from damage and metal filings.
t  Before and after drilling the rivets, thoroughly clean the differential casing.
   
–  Drill the rivet heads, on the opposite side to the speedometer gear, with a 12 mm drill bit Ø.
–  Remove the rivets from their holes with a drift.
–  Put the differential housing in a press.
  V39-1282
–  Locate tool -U-40300/13- on the differential.
–  Activate the press until the differential casing is released from the crown wheel.
  E39-0020

Differential crown: removing and installing|Installation > < Differential crown: removing and installing