| t
| Slacken bolts or nuts in reverse of tightening sequence. |
| t
| The bolts or nuts to be used to secure covers and casings must be released and tightened diagonally in stages when no tightening order is specified. |
| t
| Always renew self locking nuts and bolts |
| t
| Specified torques given are for unlubricated nuts, bolts and screws. |
| t
| Threaded holes where there had been self-locking bolts or bolts with thread locker must first be cleaned (e.g. with a thread cutting tap). If this is not done, the bolts may break when removed again. |
| t
| In all bolted unions, ensure that supporting surfaces and bolts and nuts are only waxed after installation, if this is necessary. |
|
|
|
