seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Sachs clutch: removing and installing|Fitting > < Sachs clutch: removing and installing

Leon Mk1

Removing
Removing
–  Remove gearbox → Chapter.
   
l  Use the holding tool -T20176- to lock the flywheel.
  Note
t  When removing pressure disk, use centring guide -U 10050/A- and adapter -U-10050/T- so that clutch plate does not fall.
t  When removing pressure disk from engine assembly, take care that clutch plate does not fall. This can cause damage.
–  Loosen the bolts in small steps diagonally.
  E30-10022
l  While loosening the bolts, loosen the stop -2- with the pin -1-
–  If the stop does not loosen, the pin must be pushed towards the flywheel.
–  Remove pressure disk and clutch plate.
  A30-0140

Sachs clutch: removing and installing|Fitting > < Sachs clutch: removing and installing