Leon Mk1
Installing plenum chamber cover |
Note
t | An insert is fitted in windscreen seal of new windscreens. Remove this insert before installing plenum chamber cover. |
t | The plenum chamber cover may only be pushed into the retainer by hand using light pressure, never use tools. |
Carry out the following work: |
– | Spray windscreen seal -4- with a soapy solution so that plenum chamber covers -1 and 2- are easier to press in. |
– | Position plenum chamber covers -1 and 2- on windscreen seal -4- and clip it into windscreen seal beginning in the middle using light pressure. Start with uppermost plenum chamber cover. |
– | Press clips on -3-. |
– | Press seal -5- onto plenum chamber cover. |
– | Push foam element -4- into plenum chamber cover - arrow b-. |
– | Install the wiper arms only on the left side of the plenum chamber cover → Electrical system; Rep. gr.92. |