Leon Mk1
| Assembly overview - wing |
Note| Only the left side is shown. Removal and installation on the right side of the vehicle are similar. |
| 1 - | Wing |
| q | Removing and installing → Chapter |
| 2 - | A-pillar trim |
| q | Removing and installing |
| 3 - | Insulation for rib section |
| q | Inserted between wing and A-pillar. |
| 4 - | Spreader rivet |
| 5 - | Bolt |
| q | Qty. 2. |
| q | Tightening torque 6 Nm. |
| 6 - | Bolt |
| q | Qty. 2, A-pillar. |
| q | Qty. 1, wheel housing |
| q | Qty. 1, side member |
| q | Qty. 2, wing connection piece |
| q | Tightening torque 6 Nm. |
