Leon Mk1
Front wing panel - exploded view |
Note
Only the left side is shown. The procedures for the right-hand side are carried out analogue. |
1 - | Wing panel |
q | removing and fitting → Chapter |
2 - | Bolt. |
q | Fit with zinc intermediate piece -AKL 381 035 50- |
q | Qty. 3, on A-pillar |
q | Qty. 2, on side member |
q | Qty. 2, on wing strut |
q | Qty. 3, on wing connection piece |
q | Tightening torque: 6 Nm |
3 - | Locking element |
q | Inserted between wing and A-pillar. |
q | Removing → Chapter |
4 - | Wing bracket |
5 - | Bolt. |
q | 2 off |
q | Tightening torque: 6 Nm |
6 - | Foam pad |
q | Inserted between wing and top of longitudinal member |
q | Removing → Chapter |
7 - | Retaining bracket |
8 - | Bolt. |
q | Tightening torque: 4 Nm |
9 - | Conical hexagon bolt |
q | Tightening torque: 8 Nm |
10 - | Clip |
q | For securing the water deflector |