Leon Mk1
| Assembly overview - tank flap unit and actuator |
Note| The tank flap does not have an emergency release. |
| 1 - | Filler cap set |
| q | removing and fitting → Chapter |
| 2 - | Bolt. |
| q | Tightening torque: 1.5 Nm |
| 3 - | Electric connector |
| 4 - | Rubber grommet |
| 5 - | Positioner |
| q | removing and fitting → Chapter |
| q | Without emergency release. |
| 6 - | Water drain hose |
| q | Routed between wheel housing and wheel housing liner |
