Leon Mk1
Spoiler ecomotive: Assembly overview, Part I |
1 - | Bolt |
q | Qty. 2. |
q | 2.5 Nm |
2 - | Spoiler mounting |
q | with recess for application of adhesive cord of 1K-adhesive 110 ML -DH 009 100 03-; Querschnitt of beading: Width = 6 mm, Height = 10 mm |
q | Removing and installing → Chapter |
3 - | Double-sided adhesive tape |
q | Qty. 2. |
4 - | Bushing |
5 - | Bolt |
q | Qty. 2. |
q | 2.5 Nm |
6 - | Spoiler |
q | Removing and installing → Chapter |
7 - | Side guiding |
q | Qty. 2. |
8 - | High-level brake light |
9 - | Rear lid |
10 - | Primer coating |
q | for the adhesive cord single-component adhesive 110 ML -DH 009 100 03- of the spoiler mount |
q | The position of the primer coating is determined from the recess for the adhesive cord single-component adhesive 110 ML -DH 009 100 03- of the spoiler mount. |
11 - | Primer coating |
q | for the adhesive cord single-component adhesive 110 ML -DH 009 100 03- of the roof spoiler |
q | The position of the primer coating is determined from the recess of the roof spoiler. |
12 - | Plugs |