Leon Mk1
Applying the stickers to the front wings |
– | Clean the contact surface of the new stickers and the outer plate surface of the front wing using Isopropyl or Heptanol alcohol. |
– | Then treat the area where the new sticker should be applied using silicone cleaner. |
– | Allow to dry well. |
– | Heat up the contact surface on the body to approx.35°C with a hot air gun -SAT 1416-, Check temperature with digital thermometer -SAT 4002-. |
– | Remove the backing foil -2- from the gluing strip for the new sticker. |
– | Apply the new stickers at a distance of 12 mm. |
– | Attach stickers -3- and press down with pressure tool -T20098- with force of approx 5 kg. |
– | Remove backing foil -1- from stickers. |