Leon Mk1
| Assembly overview - lid lock |
| 1 - | Retaining clip |
| 2 - | Handle |
| q | Removal: |
| – | Remove rear lid trim: → General body repairs, interior; Rep. gr.70. |
| – | Remove lock → Item. |
| – | Disconnect connections. |
| – | Remove lock cylinder housing -7- → Chapter. |
| – | Unscrew bolt -9- and take handle out of lid. |
| q | Installation: |
| – | Installation is carried out in the reverse order. |
| 3 - | Bolt |
| q | Qty. 3 |
| q | 8 Nm |
| 4 - | Lock |
| q | Removal: |
| – | Remove rear lid trim: → General body repairs, interior; Rep. gr.70. |
| – | Disconnect connector from lock. |
| – | Unscrew bolts -3- and remove lock from lid. |
| 5 - | Central locking control motor |
| q | Removing and installing: → Chapter. |
| 6 - | Bolt |
| q | Qty. 2 |
| q | 6 Nm |
| 7 - | Lock cylinder housing |
| q | Removing and installing → Chapter |
| 8 - | Anti-theft plate |
| q | Vehicles with appropriate equipment only. |
| 9 - | Bolt |
| q | 6 Nm |
