Leon Mk1
Assembly overview - front bumper |
1 - | Cover |
q | Material: PP/EPDM. |
q | Removal: |
– | Remove Torx screws -2-. |
– | Remove Torx screws -7-. |
– | Remove Torx screws -6-. |
– | Remove cover from guides -9-. |
2 - | Torx screw |
3 - | Speed nut |
4 - | Torx screw |
q | Specified torque: 30 Nm |
5 - | Bumper carrier |
6 - | Torx screw |
q | Connects cover to wheel housing liner. |
7 - | Torx screw |
8 - | Cross-head screw |
9 - | Guide |
q | To remove/install bumper, pull out or push in parallel to guides at left and right. |
10 - | Spreader clip |
11 - | Spoiler |
q | Clipped into cover. |
q | Need not be removed when removing the cover. |
12 - | Bumper strip |