seat Workshop Repair Guides

SEAT Workshop Manuals

< PREV PAGE NEXT PAGE >
Assembly overview - front bumper
   
Assembly overview - front bumper
1 - Cover
q   Material: PP/EPDM.
q   Removal:
–  Remove Torx screws -10-.
–  Remove Torx screws -11-.
–  Pull the cover off the guides -9- and remove retainers -6- (left- and right-hand sides).
–  Renew any broken retainers → Chapter.
2 - Torx screw
q   Specified torque: 15 Nm
q   Qty. 2
3 - Impact absorber
4 - Torx screw
q   Specified torque: 15 Nm
q   Qty. 4
5 - Bumper carrier
q   When dismantling, firstly remove the radiator grille with trim frame: → Chapter.
6 - Retainer for cover
7 - Hexagon bolt
8 - Cross-head screw
9 - Guide
q   To remove/install bumper, pull out or push in parallel to guides at left and right.
10 - Torx screw
q   Connects cover to wheel housing liner.
11 - Torx screw
12 - Spoiler
q   Clipped into cover.
q   Is not necessary to remove when removing the cover.

   

Body > General body repairs, exterior > Bumper > Front bumper > 05.00 > Assembly overview - front bumper

< PREV PAGE NEXT PAGE >