Leon Mk1
| Assembly overview - vent wing |
| 1 - | Cross-head screw |
| 2 - | Window lock |
| 3 - | Countersunk screw |
| 4 - | Vent wing |
| q | Supplied in manual and electric versions. |
| q | Removal: |
| – | Carefully remove cover rail -7-. Bond in position using double-sided tape. |
| – | Remove D-pillar trim: → General body repairs, interior; Rep. gr.70. |
| – | Separate connector for electric drive. |
| – | Undo countersunk screws -3- and -6- and remove vent wing. |
| 5 - | Blind rivet nut |
| q | Insert using pop rivet nut pliers -V.A.G 1765 A-. |
| 6 - | Countersunk screw |
| 7 - | Cover rail |
| q | Bond in position using double-sided tape. Use adhesive tape -D 438 525 A2- when making repairs. |
| 8 - | Sealing frame |
| q | Rolled on all round using roller -3356-. |
