Leon Mk1
| Rear bumper: removing and fitting |
| 1 - | Lining |
| q | PP/EPDM Material |
| q | Removing: |
| – | Remove the rear light units → Removing and fitting the rear light units; Rep. Gr.94 |
| – | Release the wheel housing bodies in the area of the bumper → Chapter |
| – | Extract the bolts → Item . Separate the covering from the guide elements → Item (left and right side) and the attachment strip → Item |
| – | Disconnect the connector for the registration plate lights |
| q | Installation: |
| Installation is performed in reverse of the above sequence |
| 2 - | Bumper beam |
| 3 - | Expanding hook |
| q | Four units |
| 4 - | Guiding part |
| q | For removal, the bumper must be removed |
| 5 - | Bolt |
| q | Four units |
| q | To secure the guide element → Item |
| 6 - | Attachment strip |
| 7 - | Hexagonal bolt |
| q | Four units |
| q | 15 Nm |
| 8 - | Bolt |
| q | Four units |
| q | 5 Nm |
