seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Seat padding, covers > < Rear seats

Leon Mk1

Seat height adjustment element: removal and assembly
   
Seat height adjustment element: removal and assembly
  WARNING
It is only possible to remove the seat height adjustment element when the seat is set at the highest position due to the resistance of the spring.
Removing
–  Remove the seat → Chapter
–  Extract bolt -1- and remove trim -2-.
–  Undo the hoods -5-, remove the bolts -6- and take out the adjustment lever -7-
–  Take off cover -8-
–  Extract bolt -3- and remove trim -4-.

   
–  Carefully undo the tensioning springs -2-
–  Undo the bolts -arrows- and take out the seat height adjustment element -1- from the seat frame
Installation
Installation is carried out in reverse order. The following should be taken into account:
  Note
The tightening torque of the bolts -arrows- is 10 Nm

   

Seat padding, covers > < Rear seats