seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing and installing door lining|Installation > < Removing and installing door lining

Leon Mk1

Removing
Removing
   
–  Remove the trim -1- from the handle -3-, using a flat screwdriver -2-.
–  Extract the bolts -4-.
To avoid damaging the paintwork when removing the door lining, place a sheet of cardboard or similar between the tool -T20065- and the door.
  N70-0507
–  Remove the door lining -1- using the tool -T20065--2-.
  N70-0508
–  Separate the Bowden cable from the door system. To do so, unclip sleeve -1- and remove the hook -2-.
–  Remove the connectors.
  N70-0509
–  Screw out bolts -arrows-.
–  Undo the door shelf compartment -1- at the sides using the tool -T20065--2-.
  N70-0510

Removing and installing door lining|Installation > < Removing and installing door lining